1. The spray machine must be placed in a ventilated place and cannot be used in a hole, otherwise the temperature of the spray machine will be too high, the temperature control insurance will be disconnected, and the sprayer will not be heated.
2. The spray machine can be placed flat on the ground, or installed at a high place parallel to the ground, but it cannot be installed at an incline. The upper and lower sides of the spray machine should be kept at least 30CM empty, which is conducive to the heat dissipation of the fog machine.
3. It should be installed in a place that children can't touch, away from flames and flammable and explosive materials, and 40CM away from the nozzle to prevent burns.
4. All sprayers emit a small amount of smoke (some even have a slight burnt smell) during the heating process, which is a normal phenomenon.
5. If the smoke becomes smaller, the suction pump is noisy or the smoke cannot be sprayed, the power should be cut off immediately. At the same time, check the e-juice stock, fuse, connecting wire and power plug. If the problem cannot be solved, please contact the dealer.
6. Please do not let the machine work, children do not move, and do not add flammable liquids such as oil, gas and spices when no one is there. When the machine is working, do not touch the wires to avoid electric shock.
7. Please make sure that there is no liquid and metal foreign matter entering the inside of the machine before each boot. If there is any fault, please contact the dealer. After use, it must be cooled for at least one hour before putting it in the box.
8. The maintenance cycle of the spray machine is 1-2 months. The specific maintenance is: 20% white vinegar and 80% distilled water are heated and sprayed 3 to 5 times!
9. Take good care of the remote control accessories of the hood. If they are lost, the factory will generally not provide accessories for free!
10. The accessories of each smoke machine manufacturer cannot be used for other brands of smoke machines, otherwise it will be damaged!
11. Be careful when adding e-juice to prevent the e-juice from flowing into the machine. Before moving and transporting, be sure to pour out the e-juice in the barrel and dry any liquid!
